An Array Can Store A Group Of Values, But The Values Must Be

Arrays in C++

An array is a collection of elements of the same type placed in contiguous memory locations that can be individually referenced by using an index to a unique identifier.

You are watching: An array can store a group of values, but the values must be

Five values of type int can be declared as an array without having to declare five different variables (each with its own identifier).

For example, a five element integer array foo may be logically represented as;


where each blank panel represents an element of the array. In this case, these are values of type int. These elements are numbered from 0 to 4, with 0 being the first while 4 being the last; In C++, the index of the first array element is always zero. As expected, an n array must be declared prior its use. A typical declaration for an array in C++ is:

type name ;where type is a valid type (such as int, float …), name is a valid identifier and the elements field (which is always enclosed in square brackets <>), specifies the size of the array.

Thus, the foo array, with five elements of type int, can be declared as:

int foo <5>;NOTE: The elements field within square brackets <>, representing the number of elementsin the array, must be a constant expression, since arrays are blocks of static memory whose size must be known at compile time.

See more: Agencia De Viajes Near Me – Agencia De Viajes Mexico Waukegan

Initializing arrays

By default, are left uninitialized. This means that none of its elements are set to anyparticular value; their contents are undetermined at the point the array is declared.

The initializer can even have no values, just the braces:

int baz <5> = { }; This creates an array of five int values, each initialized with a value of zero:


But, the elements in an array can be explicitly initialized to specific values when it is declared, by enclosing those initial values in braces {}. For example:

int foo <5> = { 16, 2, 77, 40, 12071 }; This statement declares an array that can be represented like this:


The number of values between braces {} shall not be greater than the number of elements in the array. For example, in the example above, foo was declared having 5 elements (as specified by the number enclosed in square brackets, <>), and the braces {} contained exactly 5 values, one for each element. If declared with less, the remaining elements are set to their default values (which for fundamental types, means they are filled with zeroes). For example:

int bar <5> = { 10, 20, 30 }; Will create an array like this:


When an initialization of values is provided for an array, C++ allows the possibility of leaving the square brackets empty<>. In this case, the compiler will assume automatically a size for the array that matches the number of values included between the braces {}:

int foo <> = { 16, 2, 77, 40, 12071 };After this declaration, array foo would be five int long, since we have provided five initialization values.

Finally, the evolution of C++ has led to the adoption of universal initialization also for arrays. Therefore, there is no longer need for the equal sign between the declaration and the initializer. Both these statements are equivalent:

int foo<> = { 10, 20, 30 };int foo<> { 10, 20, 30 }; Here, the number of the array n is calculated by the compiler by using the formula n= #of initializers/sizeof(int).

Static arrays, and those declared directly in a namespace (outside any function), are always initialized. If no explicit initializer is specified, all the elements are default-initialized (with zeroes, for fundamental types).

Array accessing

The values of any of the elements in an array can be accessed just like the value of a regular variable of the same type. The syntax is:


Following the previous examples in which foo had 5 elements and each of those elements was of type int, the name which can be used to refer to each element is the following:


For example, the following statement stores the value 75 in the third element of foo:

foo <2> = 75; and, for example, the following copies the value of the fourth element of foo to a variable called x:

x = foo<3>;Therefore, the expression foo<2> or foo<4> is always evaluated to an int. Notice that the third element of foo is specified foo<2>, the second one is foo<1>, since the first one is foo<0>. It’s last element is therefore foo<4>. If we write foo<5>, we would be accessing the sixth element of foo, and therefore actually exceeding the size of the array.

See more: Consulado De Honduras En Atlanta, Latin American Chamber Of Commerce Of Georgia, Ga

In C++, it is syntactically correct to exceed the valid range of indices for an array. This can create problems, since accessing out-of-range elements do not cause errors on compilation, but can cause errors on runtime. The reason for this being allowed because index checking slows down program execution. At this point, it is important to be able to clearly distinguish between the two uses that brackets <> have related to arrays. They perform two different tasks: one is to specify the size of arrays when they are declared; and the second one is to specify indices for concrete array elements when they are accessed. Do not confuse these two possible uses of brackets <> with arrays.

int foo<5>; // declaration of a new arrayfoo<2> = 75; // access to an element of the array. The main difference is that the declaration is preceded by the type of the elements, while the access is not.

Some other valid operations with arrays:

foo<0> = a;foo = 75;b = foo ;foo> = foo + 5;For example: // arrays example#include using namespace std;int foo <> = {16, 2, 77, 40, 12071};int i, result=0;int main (){ for ( i=0 ; i12206 Multidimensional arraysMultidimensional arrays can be described as “arrays of arrays”. For example, a bi-dimensional array can be imagined as a two-dimensional table made of elements, all of them hold same type of elements.


Table represents a bi-dimensional array of 3 per 5 elements of type int. The C++ syntax for this is

int Table <3><5>; and, for example, the way to reference the second element vertically and fourth horizontally in an expression would be:



(remember that array indices always begin with zero).

Multidimensional arrays are not limited to two indices (i.e., two dimensions). They can contain as many indices as needed. Although be careful: the amount of memory needed for an array increases exponentially with each dimension. For example:

char century <100><365><24><60><60>;Declares an array with an element of type char for each second in a century. This amounts to more than 3 billion char! So this declaration would consume more than 3 gigabytes of memory! And such a declaration is highly improbable and it underscores inefficient use of memory space.

At the end, multidimensional arrays are just an abstraction for programmers, since the same results can be achieved with a simple array, by multiplying its indices:

int Table <3><5>; // is equivalent toint Table <15>; // (3 * 5 = 15) With the only difference that with multidimensional arrays, the compiler automatically remembers the depth of each imaginary dimension. The following two pieces of code produce the exact same result, but one uses a bi-dimensional array while the other uses a simple array:


Leave a comment

Your email address will not be published. Required fields are marked *